Osram QHE 3X32T8/UNV-ISH-HT-SC-B Quicktronic Electronic Instant Start Ballast - 120-277V - 10ct

2021-06-13T09:31:20-07:00

Vendor: Osram
Type: Ballast
Price: 258.95

This product is an Osram QHE 3X32T8/UNV-ISH-HT-SC-B Quicktronic electronic instant start ballast. It has an input frequency of 50/60 Hz and a universal 120-277V voltage.

OSRAM QUICKTRONIC High Efficiency (QHE) energy-saving electronic T8 ISH (PLUS) ballasts offer several advantages:

Same Light, Less Power! Up to 6% in energy savings compared to standard T8 low power electronic ballasts without compromising light output. Maximum energy savings whencompared to F40T12 magnetically ballasted systems.

High Light Output: Higher lumens per fixture, fewer fixtures required for same light output

Parallel Circuitry: keeps remaining lamps lit if one or more go out.

Lamp Striation Control (LSC): T8 energy saving lamps should be operated above 60°F, but under certain conditions the lamps may striate. LSC circuitry may minimize or eliminate this condition; however there are limited applications where LSC circuitry may not entirely mitigate lamp striations. These ballasts are also RoHS compliant and feature lead-free solder and manufacturing process.

High Ambient Temp: specifically designed for those applications where the ballast is subject to higher ambient temperatures, such as highbays in industrial installations.

QUICKTRONIC High Efficiency (QHE) systems are covered by the QUICK 60+ warranty, the first and most comprehensive lamp & ballast system warranty in the industry.

Features

High Efficiency Systems over 90% efficient

90°C maximum case temp.

Lamp Striation Control (LSC)

Over 100 LPW (lumens/watt) with OCTRON SUPERSAVER lamps

Lowest power T8 PLUS Systems

Universal voltage (120-277V)

1.18-1.20 ballast factor

30-50% Energy savings

Min. Starting Temp: -20°F(-29°C) for T8 lamps, 60°F (16°C) for Energy Saving T8 lamps

<10% THD

Virtually eliminates lamp flicker

RoHS compliant

Lead-free solder and manufacturing process

Applications

QUICKTRONIC High Efficiency ballasts are ideally suited for:

Any applications where the highest light output for the lowest amount of power T8 systems are needed for maximum energy savings

High bay lighting

Energy Retrofits

Commercial & Retail

Hospitality & Institutional

New Construction

System Information

QUICKTRONIC High Efficiency (QHE) System advantages:

Operate from 120V through 277V

Eliminates "wrong voltage" errors

Reduces inventory by 50%

Utilizes Instant Start operation for Highest System Efficacy

Low temperature starting capability

Very low harmonic distortion (<10%) THD

Operate at >42 kHz to reduce potential interference with infrared control systems