Sylvania 40963 - 17W T8 LED - Ballast Bypass - 4ft - 3500K - Plastic - 25ct

2021-08-20T10:14:42-07:00

Vendor: Sylvania
Type: LED Linear Bulb
Price: 326.95

This product is a Sylvania 40963 17W T8 LED linear tube. It is a UL Type B Ballast Bypass LED tube. It has a length of 4ft and a 3500K color temperature. This bulb is made of plastic.

LEDlescent T8 Ballast-Free lamps are an energy saving alternative, designed to replace traditional fluorescent T8/T12 lamps by bypassing the existing ballast. These LED T8 lamps contain no mercury, provide instant light and a uniform light distribution.

Engineered to operate directly on 120-277V, these lamps minimize labor and recycling costs. These lamps can be used with occupancy and vacancy sensors for enhanced energy savings.

When installing the LEDlescent T8 lamps, the UL rating of the existing fixture is not voided (even when it is electrically modified) since our LEDlescent T8 lamp is UL Classified (as a luminaire conversion retrofit kit) under UL standard 1598C. UL 1598C is the standard covering LED retrofits intended for an existing UL rated fixture. Since the user is retrofitting with a UL1598C classified LED kit, the installer must follow the installation instructions included with the lamps for the modified fixture to retain its UL rating.

Features and Benefits

Optimized glass optics

Installed directly on 120-277V

Patented built-in safety circuit prevents current from flowing through the lamp when only one end is engaged in the socket thereby eliminating potential shock hazard

No risk of electrical arcing between the lamp pins and the lamp holders

For use with shunted and non-shunted sockets therefore no socket change is needed

Double ended lamp is wired end-to-end preventing non-passive failure of a fluorescent lamp should it be inadvertently installed in the fixture

THD <20%, power factor >0.90

Long life: 50,000 hour life (L70)

Non-dimmable

5 year limited lamp warranty (24/7 operation)

No warm-up time, instant-on with full light output and stable lamp to lamp color

No UV emission

Suitable for dry and damp locations (cannot come in direct contact with water)

Maximize energy savings with occupancy sensors

Suitable for open and enclosed fixtures

Approved for use with tube guards