Larson Electronics LED UVA Low Profile Fixture - 20W - 24" Length - 12/24 VDC
Buy American Compliant
The Larson Electronics HAL-24-IPS-LED-UVA is a low voltage ultraviolet hazardous location lighting solution approved for Class 1 Division 2 environments and UL 1598 listed for use in wet locations. This powerful 24" long LED strip light produces 7,000 mW radiant intensity, operates on 12 or 24 VDC, and is suitable for hazardous locations where UV lamps are used in paint and adhesive curing, food inspection or for non-destructive testing, as well as food processing, vision systems, and automation systems.
The HAL-24-IPS-LED-UVA is designed to provide a high output and ruggedly durable lighting solution for applications where ultraviolet light is needed and Class 1 Division 2 compliance is required. This low voltage hazardous location UV light emits light in the ultraviolet spectrum. This 365NM strip light can be operated on either 12 or 24 volt DC current and includes 6 feet of connecting lead with standard two wire configuration. The housing is constructed of powder coated extruded aluminum for excellent strength and durability and is rated IP65 for protection against exposure to splashing water and limited dust ingress. These units are configured in a 13.90" long strip or "bar" profile for installation in locations where wide dispersal and a low profile is preferred. The high output, cool running operation, and good color rendering properties of this light make it an ideal replacement for older, bulkier, and less reliable HID and halogen light fixtures.
The HAL-24-IPS-LED-UVA uses LED light technology, a technology that is far better in energy saving than traditional fluorescent bulbs used for the same purposes. Traditional ultraviolet lights require a coating to block out visible light or a special composition of gases and chemicals used to create a higher concentration of ultraviolet light. This process, however, also produces many other wavelengths of light which go unused and end up as wasted energy. LED lights are unique in that they have a narrower wavelength band than traditional ultraviolet sources and therefore do not require these special coatings. As a result, LED lights do not produce unused, wasted light and therefore consume less energy than traditional UV lights on the market. LED lights have the added benefit of being capable of producing very specific wavelengths with tighter curves and are more durable and lightweight as well.
Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.
LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.
This Class 1, Division 2 LED ultraviolet light fixture can be used for non-destructive testing in aviation and manufacturing, food processing and inspection, and in paint, coating, and adhesive curing. The HAL-24-IPS-LED-UVA provides operators in hazardous locations with a reliable and durable UV lighting solution that combines effective production of UV light with explosion proof protection and is applicable for leak detection, vision systems, automation systems, paint spray booths, ink, coatings, and adhesive curing, non-destructive testing, inspection, and food processing.
Ultraviolet Wavelength: Ultraviolet A Wavelength produces a longer wave between the 400nm - 315nm spectrum. This explosion proof LED light has a peak wavelength of 365NM.
Durability: The HAL-24-IPS-LED-UVA hazardous location LED light is constructed of extruded aluminum with a tough powder coat finish for high strength and durability. The housing is IP65 rated, providing limited ingress protection against dusts, and basic protection against splashing water such as rain. This design is weather resistant, suitable for indoor or outdoor applications, and ideal for areas where wetness or dusty conditions are commonly encountered.
Mounting: Mounting for this unit is provided by two standard adjustable end brackets that allow operators to mount the light to flat surfaces and then adjust the light 170° vertically for the best placement. The entire assembly weighs 0.7 lbs and measures 24 inches in length, and 2.68 inches wide and 1.69 inches deep, making it ideal for mounting in areas where space is limited and a low profile fixture more readily installed.
Wiring/Power: This light is universal voltage capable and operates on AC/DC voltages from 11-25 Volts. Each strip light is equipped with 6 feet of 16/3 SOOW cable containing a standard two wire (White+ Black-) connecting configuration for making power connections.
Versatility: The HAL-24-IPS-LED-UVA is ETL approved for Class 1 Division 2 groups A, B, C and D locations. This unit carries an IP65 water resistant rating ensuring protection against limited ingress from dusts, dirt, and basic protection against light water spray landing directly on the fixture. This light is ideal for indoor or outdoor applications and industrial operations with hazardous location classification where dusty or wet conditions are commonly encountered.
Returns and Cancellation Notice
All Larson Electronics orders are subject to a minimum 15% cancellation fee. Larson Electronics UVC products are non-returnable once shipped. If you need help choosing a product, please contact us before ordering.
About Larson Electronics
Founded in 1973, Larson Electronic is an industrial lighting company, providing solutions for government, military, aviation, oil and gas, processing, manufacturing, and other markets. The company manufactures power distruction, industrial controls, explosion proof equipment, and UV lighting products in the USA. Larson is also able to provide customized fabrication for complex lighting and power requirements and has over 70,000 square feet of manufacturing and warehouse space.
|Construction Material||Extruded Aluminum|
|Country of Origin||USA|
|Dimensions||24" L x 2.68" W x 1.69" D|
|Finish||Powder Coated Black|
|Lamp Type||UVA LED|
|Mounting||Adjustable Swivel Mount Surface Bracket|
|Rated Life Hours||50000|
|ProLampSales Order Code||7664278208766|
There are currently no videos for this product.
Optional Parts & Accessories
Expedited Shipping Rates
For expedited shipping, please contact us for a price quote and cutoff times.
Continental United States
- Shipping for most orders is calculated at checkout*
- If you want to ship on your own UPS/Fedex account, please contact us
*Certain restrictions apply, including oversize, heavy objects, and some fixtures/equipment.
For large, heavy, or oversized items, additional shipping charges may apply. The site may not correctly calculate freight shipments at time of order. Large counts of smaller products may also result in additional shipping costs. We apologize for any inconvenience this may cause. Please contact us for an estimate on large items to determine an accurate shipping cost.
Alaska & Hawaii
- Shipping calculated at checkout
- Contact us for a quote.
Contact us for a quote. We do not ship most glass bulbs and fixtures internationally. If you have your own UPS/Fedex/DHL account, we may be able to ship using that.
Shipping to US-Based Freight Forwarders
For shipments to freight forwarders, we are only responsible for shipping to the freight forwarder directly. Please have your freight forwarder check your items for damage. We are not responsible for shipping damages incurred at or after the items leave the freight forwarder.
Business Office Hours
We can be reached by phone (800-784-1998) weekdays from 7:30am to 5pm Pacific Time.
Our business office is closed Saturday and Sunday throughout the year, Memorial Day, Fourth of July, Labor Day, Thanksgiving day, Christmas day and New Year's day.
Orders can be placed on the website at anytime - 24/7.
California Title 20 Notice
Certain general service lighting products are no longer allowed to be sold in California. We make every attempt to inform you before purchase which items are unable to ship to California. If we discover an item you purchased can not be shipped, we may have to cancel the order. We apologize for any inconvenience this causes. Please contact your state representative for more information.
California Prop 65
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Returns are sometimes necessary. Our policy is to provide you with a hassle-free return experience.
Items Damaged in Shipping
If the product was damaged during shipping, first keep all packing materials, then call or email us to report the damage. Damage must be reported with 3 days of you receiving the shipment. We will have you return the product using the Returned Material Authorization (RMA) we will provide. We will send you a new product or provide a full refund and we will reimburse you for any shipping charges you may incur.
If all the items you ordered are not in the shipment, call us within 3 days of receiving the shipment so we can promptly send the missing item(s).
Wrong Product Ordered or Product No Longer Needed
If you ordered the wrong product call or email us so we can help you get the correct product. If the product purchase error was in no way the fault of information provided on ProLampSales.com, you are responsible for the return shipping cost and a 25% re-stocking fee.
30 Day Return Policy
Items ordered from ProLampSales can be returned within 30 days of receipt of the shipment in most cases. Please check that all of your items are present and in working condition within this timeframe.
After 30 days, if the product does not perform to specifications or fails within stated warranty periods, see manufacturer warranty information for procedures to follow.
Products that Differ from Our General Return Policy
International orders are non-returnable.
Gas Detectors & Air Quality Monitors
For safety reasons, we do not accept returns on gas detectors or air quality monitors. Once these products leave our warehouse, we can not be sure what environments they are used/stored in or what dangerous gases or pollutants they are exposed to.
Larson Electronics UVC lighting products of any kind are non-returnable. Larson Electronics orders are subject to a minimum 15% cancellation fee. If you need help with a product, please contact us before ordering or verify that you are ordering the correct item.
Non-Quick Ship Soraa brand products are non-returnable. If an error was made in order fulfillment or shipping, replacements may be sent out or a refund issued.