Larson Electronics Low Intensity Obstruction Light - 8W - AC Input/DC Output - Red

8W Low Intensity LED Light - AC Input/DC Output, Steady Burn - Type B - FAA Compliant - Red

The Larson Electronics AVL-L810-CPR-RED is a Type B Low Intensity LED Light for the aviation sector and harsh outdoor environments. This FAA compliant unit offers red light output in a steady burn configuration. The IP66-rated LED lamp offers protection from electrical surges and lightning. Constructed of aluminum and polycarbonate, the LED obstruction light comes with a lightning rod and a circular base plate for mounting on flat surfaces and walls.

The AVL-L810-CPR-RED is a low-intensity LED obstruction light for airports and aviation-related operations. This 8-watt steady burn unit operates with an input of 100V-250V AC (220V) 50/60 Hz, stepped down to low voltage output of 9-10V DC. During use, the LED lamp emits a red beam with 50-500 cd/m2 adjustable light control settings. Robust optics ensure minimal light spillage and efficient light projection. Suitable for marking structures and notifying aircrafts in the surrounding environment, the LED light is wind resistant at 80 m/s and features a lightning rod at the top of the lamp. For additional controls, the unit can be connected to light control systems, GPS synchronous controller systems, automatic control switches and control boxes.

The Type B LED obstruction light is constructed of aluminum/polycarbonate and features a lightweight design. Equipped with anti-surge and lightning protection, this unit offers constant current output for increased reliability and smooth operation. The IP66-rated and corrosion resistant LED lamp is designed to operate in environments with ambient temperatures ranging between -40°C to +55°C. This FAA Compliant unit complies with the following standards: ICAO: Annex 14, FAA: AC150/5345-43G and CAAC: MH/T 6012.

LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.

LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.

Mounting: This LED low intensity light is secured on a circular base plate for mounting on flat surfaces and walls. Four slots on the plate can be used to mount the LED light during installation.

Applications: Aviation, obstruction lighting, airports, military, airfield clearance zones, visual aircraft notification, commercial flying spaces, pilot safety, aviation safety and more.

Pre-Order Notice

Please take into consideration all of the following conditions before ordering Larson Electronics products. All Larson Electronics orders are subject to a minimum 15% (and up to 100%) pre-shipment cancellation fee. Larson Electronics products are non-returnable and non-refundable. Customer support for Larson products is extremely limited, if available at all. Larson Electronics products do not have warranties. Replacement parts may not be available at all. All pre-order and pre-shipment estimated ship dates are estimates only and are likely to change after ordering. Larson Electronics takes photos and videos of all products leaving their facility, and will not take responsibility for any shipment damages.

About Larson Electronics

Founded in 1973, Larson Electronic is an industrial lighting company, providing solutions for government, military, aviation, oil and gas, processing, manufacturing, and other markets. The company manufactures power distruction, industrial controls, explosion proof equipment, and UV lighting products in the USA. Larson is also able to provide customized fabrication for complex lighting and power requirements and has over 70,000 square feet of manufacturing and warehouse space.