Larson Electronics UVB Fixture - 2 Bulbs - 2' Length - Surface/Pendant Mount - Hazardous Location
Hazardous Location Area Fluorescent Light - 2 foot 2 lamp - UVB Bulbs-Class 1 Division 2 Groups A-D
Made in the USA
The Larson Electronics HAL-24-2L-BL-UV-UVB Hazardous Location UVB Fluorescent Light Fixture is Class I Division 2 rated. This fixture uses a special ballast and bulb combination to produce ultraviolet light. This lamp is T4A temperature rated and ideal for hazardous locations where UVB lamps are used to cure coatings and adhesives or as germicidal agents.
The HAL-24-2L-BL-UV-UVB fixture is a 2 foot long, 2 lamp, Class I Division 2 hazardous location fluorescent light that emits light in the ultraviolet spectrum. The HAL-24-2L-BL-UV-UVB can be configured to produce UVA, UVB or UVC light which is typically used for curing coatings or adhesives, pest management or in germicidal applications. The lamps are protected by an aluminum framed hinged glass door secured with four turn latches and the fixture is constructed of copper free aluminum alloy. The lamp reflector is corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. The lens on the HAL-24-2L-BL-UV-UVB is made from borosilicate glass.
This fixture, like our other UVB lights, operates on 120V AC only. The HAL-24-2L-BL-UV-UVB provides operators in hazardous locations with a reliable and durable UVB lighting solution for open areas where flammable chemicals and vapors may occasionally be present.
Ultraviolet B Wavelength produces a shorter wave than the UVA wavelength. These medium sized waves range from 315nm - 280nm.
Standard Surface Mount Brackets: Each L bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. Mounting brackets are removable. A single through hole enables the operator to install the light to any surface. A sliding bracket mount is available so operators can retrofit this LED light fixture to use the pre-existing mounting holes from other fluorescent fixtures. The sliding mount brackets are available in the related items order section below.
Suggested Applications: Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Chemical manufacturing, Waste treatment plants, Gas processing plants.
Returns and Cancellation Notice
All Larson Electronics orders are subject to a minimum 15% cancellation fee. Larson Electronics UVC products are non-returnable once shipped. If you need help choosing a product, please contact us before ordering.
About Larson Electronics
Founded in 1973, Larson Electronic is an industrial lighting company, providing solutions for government, military, aviation, oil and gas, processing, manufacturing, and other markets. The company manufactures power distruction, industrial controls, explosion proof equipment, and UV lighting products in the USA. Larson is also able to provide customized fabrication for complex lighting and power requirements and has over 70,000 square feet of manufacturing and warehouse space.
|Country of Origin||USA|
|Dimensions||25.5" L x 7" W x 63.1875" H|
|No. of Lamps||2|
|ProLampSales Order Code||7700314390782|
Optional Parts & Accessories
Expedited Shipping Rates
For expedited shipping, please contact us for a price quote and cutoff times.
Continental United States
- Most Orders Over $90.00 Ship Free
- Shipping for other orders is calculated at checkout
Certain restrictions apply, including oversize, heavy objects, and some fixtures/equipment.
Alaska & Hawaii
- Shipping calculated at checkout
- Contact us for a quote.
Contact us for a quote. We do not ship most glass bulbs and fixtures internationally. If you have your own UPS/Fedex/DHL account, we may be able to ship using that.
Shipping to US-Based Freight Forwarders
For shipments to freight forwarders, we are only responsible for shipping to the freight forwarder directly. Please have your freight forwarder check your items for damage. We are not responsible for shipping damages incurred after the items leave the freight forwarder.
Business Office Hours
We can be reached by phone (800-784-1998) weekdays from 7:30am to 5pm Pacific Time.
Our business office is closed Saturday and Sunday throughout the year, Memorial Day, 4th of July, Labor Day, Thanksgiving day, Christmas day and New Year's day.
Orders can be placed on the website at anytime - 24/7.
California Title 20 Notice
Certain general service lighting products are no longer allowed to be sold in California. We make every attempt to inform you before purchase which items are unable to ship to California. If we discover an item you purchased can not be shipped, we may have to cancel the order. We apologize for any inconvenience this causes. Please contact your state representative for more information.
California Prop 65
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Returns are sometimes necessary. Our policy is to provide you with a hassle-free return experience.
Items Damaged in Shipping
If the product was damaged during shipping, first keep all packing materials, then call or email us to report the damage. Damage must be reported with 3 days of you receiving the shipment. We will have you return the product using the Returned Material Authorization (RMA) we will provide. We will send you a new product or provide a full refund and we will reimburse you for any shipping charges you may incur.
If all the items you ordered are not in the shipment, call us within 3 days of receiving the shipment so we can promptly send the missing item(s).
Wrong Product Ordered or Product No Longer Needed
If you ordered the wrong product call or email us so we can help you get the correct product. If the product purchase error was in no way the fault of information provided on ProLampSales.com, you are responsible for the return shipping cost and a 25% re-stocking fee.
30 Day Return Policy
Items ordered from ProLampSales can be returned within 30 days of receipt of the shipment in most cases. Please check that all of your items are present and in working condition within this timeframe.
After 30 days, if the product does not perform to specifications or fails within stated warranty periods, see manufacturer warranty information for procedures to follow.
Products that Differ from Our General Return Policy
International orders are non-returnable.
Gas Detectors & Air Quality Monitors
For safety reasons, we do not accept returns on gas detectors or air quality monitors. Once these products leave our warehouse, we can not be sure what environments they are used/stored in or what dangerous gases or pollutants they are exposed to.
Larson Electronics UVC lighting products of any kind are non-returnable. Larson Electronics orders are subject to a minimum 15% cancellation fee. If you need help with a product, please contact us before ordering or verify that you are ordering the correct item.
Non-Quick Ship Soraa brand products are non-returnable. If an error was made in order fulfillment or shipping, replacements may be sent out or a refund issued.