Larson Electronics UVC Disinfection Box - 51" L x 15" D x 7" H - 8 Bulbs - Medical Grade
This product is made in the USA and manufactured in Texas.
The Larson Electronics IND-TBL-BX-R2-51.15.7-UVC-8X-120V is a Medical Grade Rapid Anti-viral/Anti-Bacterial Decontamination Box which can disinfect kill 99% of viruses, bacteria, mold, and spores and bacteria found on tools, medical equipment, and work devices. With access to eight 40-watt UV lamps, this unit offers UV-C output at a range of 200nm - 280nm (253.7nm). The 304 stainless steel disinfection box comes with a timer, external indicator light, and an automatic shut off safety feature.
***PLEASE NOTE: UV-C light can cause temporary or permanent loss of vision, and temporary acute redness or ulceration (mild to severe sunburn) to exposed skin. To prevent exposure, do not operate the device in any application that allows UV-C light to be visible during operation. NEVER LOOK DIRECTLY AT THE BULB OR DISINFECTING TARGET ZONE. DO NOT touch bulb with bare hands. The oils in your skin will damage the lamp. Fingerprints will result in reduced performance and significantly reduce the lifespan of the lamp unless they are removed with alcohol. Please read instruction manual for UV safety requirements before operating. UVC light in the proper setting kills up to 99.9% of viruses, mold, spores and bacteria.
The IND-TBL-BX-R2-51.15.7-UVC-8X-120V is a powerful sanitation solution for industrial sites and commercial facilities. Equipped with eight UVC fluorescent lamps, this system offers UV output, within the 200nm - 280nm UV-C range (253.7 nm). The lights have an expected lifespan of 8,000+ hours and emit a flood beam pattern. These lamps are arranged for maximum exposure, with two 40-watt UV lamps per side (including two lamps at the back of the door). Inside the box, the UV system offers 360 degrees of coverage. The unit has a wire shelf inside the box for mounting of devices.
With a short exposure time at full capacity, multiple devices can be purchased to clean several tablets or phones at the same time. Single tablets can be cleaned in as little as 2 minutes, whereas a single phone can be cleaned in 1 minute. Operators may access a timer on the box to ensure the recommended duration of exposure (1-30 mins) is met every session. An external indicator light notifies individuals when the box is on and sanitation is ongoing.
A wide front-facing hinged door that spans the length of the box provides access to the unit (the door folds downward). An automatic shut off safety feature cuts power to the system when the door is open. This system is constructed of 304 stainless steel for durability. The box does not have a coating to ensure reflection of UV light inside the unit.
The UV light can disinfect over 99% of bacteria, viruses, kill 99% of viruses, bacteria, mold, and spores, mold and spores. This device is recommended for disinfecting compact tools and equipment on tables, desks, work stations and surfaces. Individuals may leave their electronics and personal devices (such as keys, cell phones, laptops, etc.) inside the box. The system can also be used to disinfect medical equipment, including masks, face shields, gloves ventilators, hoses and more. After exposure, the devices can be used again immediately.
Voltage: The IND-TBL-BX-R2-51.15.7-UVC-8X-120V operates on 120V AC, 60Hz.
Wiring/Plug: This UV decontamination box is equipped with 25 feet of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V wall outlets with ground, NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets, standard 5-20 20 amp straight blade plug for 110V wall outlets with ground or or NEMA L5-20 20 amp twist lock plug for 125V twist lock outlets. Alternatively, we can provide flying leads with no plugfor hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose pigtail option below for flying leads with no plug.
Mount: This desktop sanitation device has a flat base for stand alone operation on flat surfaces, such as tables.
Note on Environment: Sunlight and visible light fixtures do not impact the effectiveness of the disinfecting on this UVC sanitation product. Metal halide, high pressure sodium, fluorescent, and LED light fixtures can be left on. The UV radiation emitted from this product is not disrupted by any type of lighting in the environment. Put simply, NO it DOES NOT need to be dark in the area you plan to disinfect. The UV radiation is harmful to the eyes and skin, and that is why you should not be in the area while it is in operation. Please see user manual for additional safety information.
Suggested Applications: Sanitation, disinfection, kill 99% of viruses, bacteria, mold, and spores, retail spaces, lobbies, commercial locations, industrial parks, schools, public transportation hubs, airports, office buildings, medical centers and more.
At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 800-369-6671 or message email@example.com for more information about our custom options tailored to meet your specific industry needs.
Please take into consideration all of the following conditions before ordering Larson Electronics products. All Larson Electronics orders are subject to a minimum 15% (and up to 100%) pre-shipment cancellation fee. Larson Electronics products are non-returnable and non-refundable. Customer support for Larson products is extremely limited, if available at all. Larson Electronics products do not have warranties. Replacement parts may not be available at all. All pre-order and pre-shipment estimated ship dates are estimates only and are likely to change after ordering. Larson Electronics takes photos and videos of all products leaving their facility, and will not take responsibility for any shipment damages.
About Larson Electronics
Founded in 1973, Larson Electronic is an industrial lighting company, providing solutions for government, military, aviation, oil and gas, processing, manufacturing, and other markets. The company manufactures power distruction, industrial controls, explosion proof equipment, and UV lighting products in the USA. Larson is also able to provide customized fabrication for complex lighting and power requirements and has over 70,000 square feet of manufacturing and warehouse space.
|Bulb Life Hours||8000+|
|Construction Material||304 Stainless Steel - Uncoated Box, Glass Shelf|
|Country of Origin||USA|
|Dimensions||51"L x 15"D x 7"H|
|Mounting||Stand Alone Device|
|No. of Lamps||8|
|Total UV Output||86.16W|
|ProLampSales Order Code||6269019259080|
Optional Parts & Accessories
Expedited Shipping Rates
For expedited shipping, please contact us for a price quote and cutoff times.
Continental United States
- Shipping for most orders is calculated at checkout*
- If you want to ship on your own UPS/Fedex account, please contact us
*Certain restrictions apply, including oversize, heavy objects, and some fixtures/equipment.
For large, heavy, or oversized items, additional shipping charges may apply. The site may not correctly calculate freight shipments at time of order. Large counts of smaller products may also result in additional shipping costs. We apologize for any inconvenience this may cause. Please contact us for an estimate on large items to determine an accurate shipping cost.
Alaska & Hawaii
- Shipping calculated at checkout
- Contact us for a quote.
Contact us for a quote. We do not ship most glass bulbs and fixtures internationally. If you have your own UPS/Fedex/DHL account, we may be able to ship using that.
Shipping to US-Based Freight Forwarders
For shipments to freight forwarders, we are only responsible for shipping to the freight forwarder directly. Please have your freight forwarder check your items for damage. We are not responsible for shipping damages incurred at or after the items leave the freight forwarder.
Business Office Hours
We can be reached by phone (800-784-1998) weekdays from 7:30am to 5pm Pacific Time.
Our business office is closed Saturday and Sunday throughout the year, Memorial Day, Fourth of July, Labor Day, Thanksgiving day, Christmas day and New Year's day.
Orders can be placed on the website at anytime - 24/7.
California Title 20 Notice
Certain general service lighting products are no longer allowed to be sold in California. We make every attempt to inform you before purchase which items are unable to ship to California. If we discover an item you purchased can not be shipped, we may have to cancel the order. We apologize for any inconvenience this causes. Please contact your state representative for more information.
California Prop 65
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Returns are sometimes necessary. Our policy is to provide you with a hassle-free return experience.
Items Damaged in Shipping
If the product was damaged during shipping, first keep all packing materials, then call or email us to report the damage. Damage must be reported with 3 days of you receiving the shipment. We will have you return the product using the Returned Material Authorization (RMA) we will provide. We will send you a new product or provide a full refund and we will reimburse you for any shipping charges you may incur.
If all the items you ordered are not in the shipment, call us within 3 days of receiving the shipment so we can promptly send the missing item(s).
Wrong Product Ordered or Product No Longer Needed
If you ordered the wrong product call or email us so we can help you get the correct product. If the product purchase error was in no way the fault of information provided on ProLampSales.com, you are responsible for the return shipping cost and a 25% re-stocking fee.
30 Day Return Policy
Items ordered from ProLampSales can be returned within 30 days of receipt of the shipment in most cases. Please check that all of your items are present and in working condition within this timeframe.
After 30 days, if the product does not perform to specifications or fails within stated warranty periods, see manufacturer warranty information for procedures to follow.
Products that Differ from Our General Return Policy
International orders may be non-returnable. Please contact us before ordering.
Gas Detectors & Air Quality Monitors
For safety reasons, we do not accept returns on gas detectors or air quality monitors. Once these products leave our warehouse, we can not be sure what environments they are used/stored in or what dangerous gases or pollutants they are exposed to.
Larson Electronics products of any kind are non-returnable. Larson Electronics orders are subject to a minimum 15% (and up to 100%) pre-shipment cancellation fee. If you need help with a product, please contact us before ordering or verify that you are ordering the correct item.
Non-Quick Ship Soraa brand products are non-returnable. If an error was made in order fulfillment or shipping, replacements may be sent out or a refund issued.