• Send Us a Message
  • Menu
    Cart 0

    Larson Electronics UVC Elevator Light - 40W - 48" - Motion Sensor - Continuous Operation

    Made in the USA
    • $1,143.20
    Contact Us for Lead Time.

    This product is made in the USA and manufactured in Texas.

    The Larson Electronics IND-EV-SS-48-1L-UVC-V3-MS Corner Mount UV Fluorescent Fixture provides continuous UVC illumination at a 45° angle to the ground which is ideal for use in elevators. This 40-watt unit features one, 4-foot UV fluorescent lamp with shatterproof coating, housed in a 304 stainless steel housing. The luminary caters to corner surface mounting, operates on 120-277 V AC, 50/60 Hz, and is equipped with a motion sensor. The IND-EV-SS-48-1L-UVC-V3-MS runs continuously as long as it has power and only shuts off when it detects the movement of passengers. For best results, combine 2-3 of these fixtures inside each elevator car.

    *Please note: This product produces UV light. Make sure to follow all safety guidelines and protocols found in the user manual. UVC light in the proper setting kills up to 99.9% of viruses, mold, spores, and bacteria.

    The IND-EV-SS-48-1L-UVC-V3-MS is a fluorescent-based continuous UV lighting system for elevators requiring effective sanitation or disinfection. Consisting of one, 4-foot fluorescent UV lamp, the 40-watt unit offers 254nm UVC output with a wavelength range of 200nm to 280nm. Radiant intensity is 117 uW/cm2 per lamp and total UV output is 11.78 watts. This UV fixture operates on 120-277V AC, 50/60 Hz (ballast voltage) and features a G13 medium bi-pin cap base. The UV lamps contain an 8,000-hour useful lifespan.

    The UV light's housing is constructed of 304 stainless steel, with zinc-coated hubs. A durable PEF coating makes the lamp shatter resistant and provides protection from impacts. Should the bulb break during an emergency, the internal contents and glass will remain trapped inside the unit. This coating adds an extra layer of safety for elevator passengers and maintenance crews.

    UV radiation from the unit can damage the skin and eyes without proper protection. Operators should avoid exposure to the eyes and skin when the unit is unshielded (for use in enclosed environments only). In the event of lamp breakage, it is recommended to ventilate the room for 30 minutes and clean the area with gloves (not a vacuum cleaner). Contents should be stored in a sealed plastic bag and brought to a waste/recycling facility.

    Motion Sensor: The IND-EV-SS-48-1L-UVC-V3-MS is equipped with a microwave motion sensor for an additional layer of safety while the unit is in use. Due to the potential harm UVC light can cause to a person's skin and vision, it is unsafe to be near the light while it is powered on. To avoid accidental exposure to the UV light produced by this elevator light, it is equipped with a 360° motion sensor. When the motion sensor detects movement inside the elevator car, it will power off the light. When no motion has been detected for at least 5 minutes, the unit will power back on. This component is capable of sensing through thin materials (it does not need direct line of sight) and effectively covers 12' x 12' areas.

    Mounting/Wiring: The IND-EV-SS-48-1L-UVC-V3-MS features a corner surface mounting system that allows the beam to project at a 45° towards the ground. Operators may use two L-bracket mounting brackets (located on the rear of the fixture) for secure installations. The brackets both have a 45° bend that allows the fixture to be angled downwards during installation. Combine 2-3 of these fixtures in each elevator car for best results. Power connections to the UV unit can be completed via two accessible, threaded wiring hubs (1/2" or 3/4").

    Note on Environment: Sunlight and visible light fixtures do not impact the effectiveness of the disinfecting on this UVC sanitation product. Metal halide, high pressure sodium, fluorescent, and LED light fixtures can be left on. The UV radiation emitted from this product is not disrupted by any type of lighting in the environment. Put simply, NO it DOES NOT need to be dark in the area you plan to disinfect. The UV radiation is harmful to the eyes and skin, and that is why you should not be in the area while it is in operation. Please see user manual for additional safety information.

    Applications:Elevator car disinfection.

    Pre-Order Notice

    Please take into consideration all of the following conditions before ordering Larson Electronics products. All Larson Electronics orders are subject to a minimum 15% (and up to 100%) pre-shipment cancellation fee. Larson Electronics products are non-returnable and non-refundable. Customer support for Larson products is extremely limited, if available at all. Larson Electronics products do not have warranties. Replacement parts may not be available at all. All pre-order and pre-shipment estimated ship dates are estimates only and are likely to change after ordering. Larson Electronics takes photos and videos of all products leaving their facility, and will not take responsibility for any shipment damages.

    About Larson Electronics

    Founded in 1973, Larson Electronic is an industrial lighting company, providing solutions for government, military, aviation, oil and gas, processing, manufacturing, and other markets. The company manufactures power distruction, industrial controls, explosion proof equipment, and UV lighting products in the USA. Larson is also able to provide customized fabrication for complex lighting and power requirements and has over 70,000 square feet of manufacturing and warehouse space.

    Bulb Life Hours8000
    Construction Material304 Stainless Steel
    Country of OriginUSA
    Frequency50/60 Hz
    Mounting(2) 45° Rear Mounted L-Brackets
    No. of Lamps1
    Total UV Output11.78W

    ProLampSales Order Code6184167506120
    BrandLarson Electronics



    Optional Parts & Accessories

    Shipping Policy

    Expedited Shipping Rates

    For expedited shipping, please contact us for a price quote and cutoff times.

    Continental United States

    • Shipping for most orders is calculated at checkout*
    • If you want to ship on your own UPS/Fedex account, please contact us

    *Certain restrictions apply, including oversize, heavy objects, and some fixtures/equipment.

    For large, heavy, or oversized items, additional shipping charges may apply. The site may not correctly calculate freight shipments at time of order. Large counts of smaller products may also result in additional shipping costs. We apologize for any inconvenience this may cause. Please contact us for an estimate on large items to determine an accurate shipping cost.

    Alaska & Hawaii

    • Shipping calculated at checkout

    US Territories

    • Contact us for a quote.

    International Shipping

    Contact us for a quote. We do not ship most glass bulbs and fixtures internationally. If you have your own UPS/Fedex/DHL account, we may be able to ship using that.

    Shipping to US-Based Freight Forwarders

    For shipments to freight forwarders, we are only responsible for shipping to the freight forwarder directly. Please have your freight forwarder check your items for damage. We are not responsible for shipping damages incurred at or after the items leave the freight forwarder.

    Business Office Hours

    We can be reached by phone (800-784-1998) weekdays from 7:30am to 5pm Pacific Time.

    Our business office is closed Saturday and Sunday throughout the year, Memorial Day, Fourth of July, Labor Day, Thanksgiving day, Christmas day and New Year's day.

    Orders can be placed on the website at anytime - 24/7.

    California Title 20 Notice

    Certain general service lighting products are no longer allowed to be sold in California. We make every attempt to inform you before purchase which items are unable to ship to California. If we discover an item you purchased can not be shipped, we may have to cancel the order. We apologize for any inconvenience this causes. Please contact your state representative for more information.

    California Prop 65

    California Prop 65 WarningWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

    Returns Policy

    Returns are sometimes necessary. Our policy is to provide you with a hassle-free return experience.

    Accepted Returns

    Items Damaged in Shipping

    If the product was damaged during shipping, first keep all packing materials, then call or email us to report the damage. Damage must be reported with 3 days of you receiving the shipment. We will have you return the product using the Returned Material Authorization (RMA) we will provide. We will send you a new product or provide a full refund and we will reimburse you for any shipping charges you may incur.

    Missing Items

    If all the items you ordered are not in the shipment, call us within 3 days of receiving the shipment so we can promptly send the missing item(s).

    Wrong Product Ordered or Product No Longer Needed

    If you ordered the wrong product call or email us so we can help you get the correct product. If the product purchase error was in no way the fault of information provided on ProLampSales.com, you are responsible for the return shipping cost and a 25% re-stocking fee.

    30 Day Return Policy

    Items ordered from ProLampSales can be returned within 30 days of receipt of the shipment in most cases. Please check that all of your items are present and in working condition within this timeframe.

    After 30 days, if the product does not perform to specifications or fails within stated warranty periods, see manufacturer warranty information for procedures to follow.

    Products that Differ from Our General Return Policy

    International Orders

    International orders may be non-returnable. Please contact us before ordering.

    Gas Detectors & Air Quality Monitors

    For safety reasons, we do not accept returns on gas detectors or air quality monitors. Once these products leave our warehouse, we can not be sure what environments they are used/stored in or what dangerous gases or pollutants they are exposed to.

    Larson Electronics

    Larson Electronics products of any kind are non-returnable. Larson Electronics orders are subject to a minimum 15% (and up to 100%) pre-shipment cancellation fee. If you need help with a product, please contact us before ordering or verify that you are ordering the correct item.


    Non-Quick Ship Soraa brand products are non-returnable. If an error was made in order fulfillment or shipping, replacements may be sent out or a refund issued.

    Customer Reviews

    Be the first to write a review