Larson Electronics UVC PCO Hydroxyl Generator - 4 Bulbs - 31.3" Length - 500 CFM

Larson Electronics UVC PCO Hydroxyl Generator - 4 Bulbs - 31.3" Length - 500 CFM

Made in the USA
  • $8,483.90
Contact Us for Lead Time.

PCO Hydroxyl Generator - (4) 55W UVC Lamps, 500 CFM Fan - MERV 13 Air Filter - Inlet/ GFCI Outlet - DT

This unit is Made In USA - Manufactured in Texas

The Larson Electronics IND-HG-HC2-UVC-4L-R2 PCO Hydroxyl Generator provides no-contact, no-ozone air sanitation inside buildings and 1,500+ square feet spaces. This no corona generator features four 55-watt UVC germicidal lamps with a titanium dioxide coated stainless steel mesh (protected by a 304 stainless steel lamp shield), MERV 13 air filter, 500 CFM nickel chrome plated fan and digital timer. All system components are secured inside a portable, wheeled case with two padlockable hasps for security and a retractable, soft-grip handle. Available connections include one 5-15 inlet and one 5-15R GFCI outlet for feed-thru operation.

*Please note: This product produces UV light. Make sure to follow all safety guidelines and protocols found in the user manual. UVC light in the proper setting kills up to 99.9% of viruses, mold, spores and bacteria.

The IND-HG-HC2-UVC-4L-R2 is a powerful air purifying solution for occupied areas and industrial facilities. This no ozone generator has four, twin tube T16 bulbs that offer 253.7 nm UVC output. Compatible with 120V AC, the UV lamps contain a 16,000-hour useful lifespan and features a titanium dioxide (TiO2) coated stainless steel mesh at the top and bottom. This component serves as a catalyst, which reacts to the UV lights during use. The reaction generates hydroxyl molecules that are capable of sanitizing bacteria, viruses, mold, odors, volatile organic compounds (VOCs) and contaminants. A 304 stainless steel lamp shield prevents stray light from exiting the unit.

Suitable for 1,500+ square feet spaces, the no ozone generator is equipped with a 500 CFM fan to promote air flow in the surrounding area. This component has a nickel chrome plating for long-term durability and corrosion resistance. An 18" x 18" x 2" MERV 13 air filter offers additional protection and filtering against bacteria, pollen, smoke, dust and more. The air filter features tie-down straps that cater to quick filter changes in the field without tools. Operators may access a digital timer for setting timed usage (the unit automatically turns off after a set duration). A 3-position switch enables the selection of the following operating modes: on with timer, on continuous (no timer) and off.

Hydroxyl is considered to be more effective and less harmful than ozone for humans. By comparison, ozone is mostly found in the stratosphere approximately 8 miles from the surface. Very little amounts of ozone exist on the ground because such elements are very harmful to humans. Hydroxyl can be found on the surface and does not impose the same hazards and dangers associated with ozone. Such compounds exist naturally in the atmosphere and help get rid of pollutants in the environment. Hydroxyl is more reactive than ozone and is capable of disinfecting a wider range of VOCs, germs and odors. This form of sanitation is also recommended for use with sensitive materials, as well as in occupied areas. Suitable for cleaning the ducts, AC coils, HVAC systems and surrounding air, there is no downtime associated with using hydroxyl generators (the area does not need to be aired out or vented for hours after treatment). Sanitizing with hydroxyl generators is most effective when there is high volume of air flow, the environment is humid or filled with moisture and a filter is present to remove or trap oxidized elements.

Hydroxyl Accelerator: This unit can be supplemented with our hydroxyl accelerator to boost effectiveness and sanitation. The optional component generates cold mist vapor near the intake vent of the air purifier, which raises the humidity level inside the system as surrounding air is drawn into the unit. Increased humidity levels enhance the purifier by streamlining the hydroxyl formation process (moisture generated by the accelerator is broken down into hydroxyl radicals). Distilled or purified water is recommended in order to preserve the lifespan of the accelerator.

UV radiation from the unit can damage the skin and eyes without proper protection. Operators should avoid exposure to the eyes and skin when the unit is unshielded. In the event of lamp breakage, it is recommended to ventilate the room for 30 minutes and clean the area with gloves (not a vacuum cleaner). Contents should be stored in a sealed plastic bag and brought to a waste/recycling facility.

Inlet/Outlet: A 15-amp 5-15 inlet is available for 120V connection with standard extension cords. This unit caters to feed-thru operation via one 15-amp 5-15R GFCI outlet. Operators can run up to two units or two other equipment. The maximum load for the entire system cannot exceed 15 amps or the amp rating of the used extension cords. Switching this air purifier off does not cut power to the output receptacle or to any connected equipment.

Portable Case: The IND-HG-HC2-UVC-4L-R2 is mobile via a portable case with two wheels. Constructed of HPX resin, the heavy-duty case has an O-ring seal. Retractable, soft-grip and side-located handles make transportation easier over surfaces. Two padlockable hasps are available for security.

Note on Environment: Sunlight and visible light fixtures do not impact the effectiveness of the disinfecting on this UVC sanitation product. Metal halide, high pressure sodium, fluorescent, and LED light fixtures can be left on. The UV radiation emitted from this product is not disrupted by any type of lighting in the environment. Put simply, NO it DOES NOT need to be dark in the area you plan to disinfect. The UV radiation is harmful to the eyes and skin, and that is why you should not be in the area while it is in operation. Please see user manual for additional safety information.

Applications: Germicidal, emergency services, vehicles, occupied areas, buildings, industrial sites, commercial locations, offices, malls, schools, disinfection, food processing, air disinfection, pharmaceuticals, biotechnology and more.

Pre-Order Notice

Please take into consideration all of the following conditions before ordering Larson Electronics products. All Larson Electronics orders are subject to a minimum 15% (and up to 100%) pre-shipment cancellation fee. Larson Electronics products are non-returnable and non-refundable. Customer support for Larson products is extremely limited, if available at all. Larson Electronics products do not have warranties. Replacement parts may not be available at all. All pre-order and pre-shipment estimated ship dates are estimates only and are likely to change after ordering. Larson Electronics takes photos and videos of all products leaving their facility, and will not take responsibility for any shipment damages.

About Larson Electronics

Founded in 1973, Larson Electronic is an industrial lighting company, providing solutions for government, military, aviation, oil and gas, processing, manufacturing, and other markets. The company manufactures power distruction, industrial controls, explosion proof equipment, and UV lighting products in the USA. Larson is also able to provide customized fabrication for complex lighting and power requirements and has over 70,000 square feet of manufacturing and warehouse space.

Bulb Life Hours16000
Construction Material304 Stainless Steel (Lamp Shield), HPX Resin (Case)
ControllerDigital Timer, 3-Position Switch (On w/ Timer, On Continuous w/ No Timer, Off)
Country of OriginUSA
Cubic Feet per Minute500
Dimensions31.3" x 20.4" x 12.2"
MountingPortable Wheeled Case - (2) Wheels; Retractable and Side-located Handles
No. of Lamps4
Spectrum254nm
Volts120
Watts220

ProLampSales Order Code7111263322312
BrandLarson Electronics
MPNIND-HG-HC2-UVC-4L-R2
HS Code853949

Documents

There are currently no videos for this product.

Optional Parts & Accessories

Alternative Products

Shipping Policy

Expedited Shipping Rates

For expedited shipping, please contact us for a price quote and cutoff times.

Continental United States

  • Shipping for most orders is calculated at checkout*
  • If you want to ship on your own UPS/Fedex account, please contact us

*Certain restrictions apply, including oversize, heavy objects, and some fixtures/equipment.

For large, heavy, or oversized items, additional shipping charges may apply. The site may not correctly calculate freight shipments at time of order. Large counts of smaller products may also result in additional shipping costs. We apologize for any inconvenience this may cause. Please contact us for an estimate on large items to determine an accurate shipping cost.

Alaska & Hawaii

  • Shipping calculated at checkout

US Territories

  • Contact us for a quote.

International Shipping

Contact us for a quote. We do not ship most glass bulbs and fixtures internationally. If you have your own UPS/Fedex/DHL account, we may be able to ship using that.

Shipping to US-Based Freight Forwarders

For shipments to freight forwarders, we are only responsible for shipping to the freight forwarder directly. Please have your freight forwarder check your items for damage. We are not responsible for shipping damages incurred at or after the items leave the freight forwarder.

California Title 20 Notice

Certain general service lighting products are no longer allowed to be sold in California. We make every attempt to inform you before purchase which items are unable to ship to California. If we discover an item you purchased can not be shipped, we may have to cancel the order. We apologize for any inconvenience this causes. Please contact your state representative for more information.

California Prop 65

California Prop 65 WarningWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Returns Policy

Returns are sometimes necessary. Our policy is to provide you with a hassle-free return experience.

Accepted Returns

Items Damaged in Shipping

If the product was damaged during shipping, first keep all packing materials, then call or email us to report the damage. Damage must be reported with 3 days of you receiving the shipment. We will have you return the product using the Returned Material Authorization (RMA) we will provide. We will send you a new product or provide a full refund and we will reimburse you for any shipping charges you may incur.

Missing Items

If all the items you ordered are not in the shipment, call us within 3 days of receiving the shipment so we can promptly send the missing item(s).

Wrong Product Ordered or Product No Longer Needed

If you ordered the wrong product call or email us so we can help you get the correct product. If the product purchase error was in no way the fault of information provided on ProLampSales.com, you are responsible for the return shipping cost and a 25% re-stocking fee.

30 Day Return Policy

Items ordered from ProLampSales can be returned within 30 days of receipt of the shipment in most cases. Please check that all of your items are present and in working condition within this timeframe.

After 30 days, if the product does not perform to specifications or fails within stated warranty periods, see manufacturer warranty information for procedures to follow.

Products that Differ from Our General Return Policy

International Orders

International orders may be non-returnable. Please contact us before ordering.

Gas Detectors & Air Quality Monitors

For safety reasons, we do not accept returns on gas detectors or air quality monitors. Once these products leave our warehouse, we can not be sure what environments they are used/stored in or what dangerous gases or pollutants they are exposed to.

Larson Electronics

Larson Electronics products of any kind are non-returnable. Larson Electronics orders are subject to a minimum 15% (and up to 100%) pre-shipment cancellation fee. If you need help with a product, please contact us before ordering or verify that you are ordering the correct item.

Soraa

Non-Quick Ship Soraa brand products are non-returnable. If an error was made in order fulfillment or shipping, replacements may be sent out or a refund issued.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)