Larson Electronics UVC Sanitation Room - 48" x 60" x 80" - 10 Induction Lamps - 2 Doorways

Made in the USA
  • $49,250.49
Contact Us for Lead Time.

This product is made in the USA and manufactured in Texas.

The IND-SB-2WB-R1-UVC-IDC-10X150W-1227 Larson Electronics Industrial UV Sanitation Room serves as a dedicated disinfection area for pallets, large containers and equipment in industrial sites. This 1,600-watt system features ten UVC induction lamps and two doorways for faster processing. Powered via an electromagnet to reduce the risk of gas leaks associated with fluorescent lights, the walls are polished for maximum UV exposure and thorough sanitation.

***PLEASE NOTE: UV-C light can cause temporary or permanent loss of vision, and temporary acute redness or ulceration (mild to severe sunburn) to exposed skin. To prevent exposure, do not operate the device in any application that allows UV-C light to be visible during operation. NEVER LOOK DIRECTLY AT THE BULB OR DISINFECTING TARGET ZONE. DO NOT touch bulb with bare hands. The oils in your skin will damage the lamp. Fingerprints will result in reduced performance and significantly reduce the lifespan of the lamp unless they are removed with alcohol. Please read instruction manual for UV safety requirements before operating. UVC light in the proper setting kills up to 99.9% of viruses, mold, spores and bacteria.

The IND-SB-2WB-R1-UVC-IDC-10X150W-1227 is a powerful disinfection solution for pallets and large containers. Equipped with ten, 150-watt UV induction lamps, this disinfection room can hold pallets up to 48" wide x 60" long x 80" tall. The lights provide UVC output within the 200nm - 280nm range. During use, the unit emits UV light in a flood beam configuration. Polished walls maximize UV reflection for thorough sanitation. This mercury-based germicidal lamp operates on single-phase 120V or 240V AC and does not contain electrodes. The lamps have a 100,000-hour useful lifespan, making the unit a long-lasting solution in work sites.

Operation: This UV unit contains two doorways at the entrance and exit for efficient, one-way processing of large equipment. To use the system, operators open the first door and place their pallet or container inside. An accessible timer can be used to increase or decrease the duration of UV treatment (exposure time). Individuals may monitor the duration of UV treatment via a digital readout. Indicator lights notify when the system is safe to open and when it is in use. An emergency-stop switch on both doors allows operators to deactivate the unit. After UV disinfection, the second doorway can be used to remove the sanitized pallet or container from the disinfection chamber.

This UV fixture is a Risk Group 3 UV product. UV radiation from the unit can damage the skin and eyes without proper protection. Operators should avoid exposure to the eyes and skin when the unit is unshielded (for use in enclosed environments only). In the event of lamp breakage, it is recommended to ventilate the room for 30 minutes and clean the area with gloves (not a vacuum cleaner). Contents should be stored in a sealed plastic bag and brought to a waste/recycling facility.

Note on Lamps: Induction lamps are similar to high-intensity discharge lamps. There is a glass bulb filled with gases, and an external ballast. The difference in the technology is, unlike metal halide or high pressure sodium that create an arc between two electrodes to ignite gases, induction lamps generate light from an electromagnetic interaction with the gases. This magnetic reaction with the gases provides a more energy efficient product and a longer lifespan over traditional high intensity discharge lamps. Additionally, there is no warm-up time generally associated with high intensity discharge lamps. Induction lamps provide instant-on light output similar to LED technology. The combination of induction lamp technology and UVC output provides the high output from high intensity discharge lamps with the instant-on, long life span, and energy efficiency of LED technology.

Mounting: The IND-SB-2WB-R1-UVC-IDC-10X150W-1227 can be deployed in facilities as a standalone UV sanitation room.

Note on Environment: Sunlight and visible light fixtures do not impact the effectiveness of the disinfecting on this UVC sanitation product. Metal halide, high pressure sodium, fluorescent, and LED light fixtures can be left on. The UV radiation emitted from this product is not disrupted by any type of lighting in the environment. Put simply, NO it DOES NOT need to be dark in the area you plan to disinfect. The UV radiation is harmful to the eyes and skin, and that is why you should not be in the area while it is in operation. Please see user manual for additional safety information.

Applications: Germicidal, industrial, sanitation, pallets, containers, packaging, manufacturing, warehouse, delivery, processing and more.

Pre-Order Notice

Please take into consideration all of the following conditions before ordering Larson Electronics products. All Larson Electronics orders are subject to a minimum 15% (and up to 100%) pre-shipment cancellation fee. Larson Electronics products are non-returnable and non-refundable. Customer support for Larson products is extremely limited, if available at all. Larson Electronics products do not have warranties. Replacement parts may not be available at all. All pre-order and pre-shipment estimated ship dates are estimates only and are likely to change after ordering. Larson Electronics takes photos and videos of all products leaving their facility, and will not take responsibility for any shipment damages.

About Larson Electronics

Founded in 1973, Larson Electronic is an industrial lighting company, providing solutions for government, military, aviation, oil and gas, processing, manufacturing, and other markets. The company manufactures power distruction, industrial controls, explosion proof equipment, and UV lighting products in the USA. Larson is also able to provide customized fabrication for complex lighting and power requirements and has over 70,000 square feet of manufacturing and warehouse space.

Bulb Life Hours100000
ControllerAdjustable Time Settings
Country of OriginUSA
Dimensions60" L x 48" W x 80" H
FinishPolished Walls
Lamp TypeUVC Induction
No. of Lamps10
Spectrum254nm
Volts120/240
Watts1600

ProLampSales Order Code7102533730504
BrandLarson Electronics
MPNIND-SB-2WB-R1-UVC-IDC-10X150W-1227
HS Code853949

Documents

There are currently no videos for this product.

Optional Parts & Accessories

Alternative Products

Shipping Policy

Expedited Shipping Rates

For expedited shipping, please contact us for a price quote and cutoff times.

Continental United States

  • Shipping for most orders is calculated at checkout*
  • If you want to ship on your own UPS/Fedex account, please contact us

*Certain restrictions apply, including oversize, heavy objects, and some fixtures/equipment.

For large, heavy, or oversized items, additional shipping charges may apply. The site may not correctly calculate freight shipments at time of order. Large counts of smaller products may also result in additional shipping costs. We apologize for any inconvenience this may cause. Please contact us for an estimate on large items to determine an accurate shipping cost.

Alaska & Hawaii

  • Shipping calculated at checkout

US Territories

  • Contact us for a quote.

International Shipping

Contact us for a quote. We do not ship most glass bulbs and fixtures internationally. If you have your own UPS/Fedex/DHL account, we may be able to ship using that.

Shipping to US-Based Freight Forwarders

For shipments to freight forwarders, we are only responsible for shipping to the freight forwarder directly. Please have your freight forwarder check your items for damage. We are not responsible for shipping damages incurred at or after the items leave the freight forwarder.

California Title 20 Notice

Certain general service lighting products are no longer allowed to be sold in California. We make every attempt to inform you before purchase which items are unable to ship to California. If we discover an item you purchased can not be shipped, we may have to cancel the order. We apologize for any inconvenience this causes. Please contact your state representative for more information.

California Prop 65

California Prop 65 WarningWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Returns Policy

Returns are sometimes necessary. Our policy is to provide you with a hassle-free return experience.

Accepted Returns

Items Damaged in Shipping

If the product was damaged during shipping, first keep all packing materials, then call or email us to report the damage. Damage must be reported with 3 days of you receiving the shipment. We will have you return the product using the Returned Material Authorization (RMA) we will provide. We will send you a new product or provide a full refund and we will reimburse you for any shipping charges you may incur.

Missing Items

If all the items you ordered are not in the shipment, call us within 3 days of receiving the shipment so we can promptly send the missing item(s).

Wrong Product Ordered or Product No Longer Needed

If you ordered the wrong product call or email us so we can help you get the correct product. If the product purchase error was in no way the fault of information provided on ProLampSales.com, you are responsible for the return shipping cost and a 25% re-stocking fee.

30 Day Return Policy

Items ordered from ProLampSales can be returned within 30 days of receipt of the shipment in most cases. Please check that all of your items are present and in working condition within this timeframe.

After 30 days, if the product does not perform to specifications or fails within stated warranty periods, see manufacturer warranty information for procedures to follow.

Products that Differ from Our General Return Policy

International Orders

International orders may be non-returnable. Please contact us before ordering.

Gas Detectors & Air Quality Monitors

For safety reasons, we do not accept returns on gas detectors or air quality monitors. Once these products leave our warehouse, we can not be sure what environments they are used/stored in or what dangerous gases or pollutants they are exposed to.

Larson Electronics

Larson Electronics products of any kind are non-returnable. Larson Electronics orders are subject to a minimum 15% (and up to 100%) pre-shipment cancellation fee. If you need help with a product, please contact us before ordering or verify that you are ordering the correct item.

Soraa

Non-Quick Ship Soraa brand products are non-returnable. If an error was made in order fulfillment or shipping, replacements may be sent out or a refund issued.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)