Luminor LBH6-251-TOC Blackcomb-HO UVC Water Purifier - 5 GPM - 1" MNPT Inlet/Outlet - Ozone Producing - IEP Port - System Diagnostics - UV Sensor

Luminor LBH6-251-TOC Blackcomb-HO UVC Water Purifier - 5 GPM - 1" MNPT Inlet/Outlet - Ozone Producing - IEP Port - System Diagnostics - UV Sensor

10 Year Warranty
  • $1,726.95
  • $2,031.00
Usually ships in 3-4 days.

LUMINOR total organic carbon (TOC) reduction systems are designed to be used for total organic carbon reduction.

For higher flow rates, consider LUMINOR's BLACKCOMB-HO 6.1 line of "Residential Crossover" UV water treatment systems.

Installed in a large residence or in a light commercial application, continuous UV water quality monitoring is provided by the inclusion of a true 254nm discrete UV monitor. Using Teflon technology for reduced fouling, these sensors allow for the addition of a solenoid shut-off valve and a 4-20mA output allowing for remote monitoring or data logging.

A color user interface allows for easy visual identification of UV intensity, remaining lamp life and any error or fault codes as well as a monitoring of a full system diagnostic on start-up. The system also incorporates QR codes to access lamp change information and videos via web access. The controller's universal input, constant current electronic power source is housed in a splash-proof case and comes standard with a "future-proof" expandability port for future upgrades or options.

Commercial grade axial flow 316L stainless steel, single-end reactors allow for lamp change without the need to drain the reactor chamber. Low pressure, high-output (LP-HO) coated UV lamps offer a consistent output over their 10,000 hour rated life.


  • NEW plastic mounting clamps (replaces gear clamp design)
  • Axial flow 316L stainless steel reactors for optimum fluid dynamics yet still allows for lamp/sleeve service without the need to drain the water
  • Designed and manufactured to ASME pressure vessel standards
  • Low pressure high-output (LP-HO) coated UV lamps for increased power density and consistent UV output throughout the rated lamp life of 10,000 hours
  • Sensor port for future upgradeability, comes with integral visual glow plug
  • LED lamp countdown constant current electronic ballast (only on 4.1 series)
  • Color user interface with full diagnostics and warnings including QR codes
  • IEP (infinite expandability port) for future upgrades and options
  • 254 nm Teflon based UV sensor with 4-20 mA output capabilities and solenoid ready capabilities (optional modules required)

About Luminor Environmental

Based in Canada, Luminor Environmental specializes in ultraviolet water treatment solutions for residential, light commercial, commercial/industrial, and municipal applications. The company strives to provide its customers with industry-leading service, support, product, and warranty. Luminor distributes UV water purification solutions to over 55 countries with hundreds of thousands of installations.

Construction Material316L Stainless Steel
Dimensions3.5" x 26.9"
Frequency50-60 Hz
Inlet/Outlet1" MNPT
PlugNorth American NEMA 5/15
Warranty10 Years

ProLampSales Order Code8097919369470
HS Code842121



Optional Parts & Accessories

Alternative Products

Shipping Policy

Expedited Shipping Rates

For expedited shipping, please contact us for a price quote and cutoff times.

Continental United States

  • Shipping for most orders is calculated at checkout*
  • If you want to ship on your own UPS/Fedex account, please contact us

*Certain restrictions apply, including oversize, heavy objects, and some fixtures/equipment.

For large, heavy, or oversized items, additional shipping charges may apply. The site may not correctly calculate freight shipments at time of order. Large counts of smaller products may also result in additional shipping costs. We apologize for any inconvenience this may cause. Please contact us for an estimate on large items to determine an accurate shipping cost.

Alaska & Hawaii

  • Shipping calculated at checkout

US Territories

  • Contact us for a quote.

International Shipping

Contact us for a quote. We do not ship most glass bulbs and fixtures internationally. If you have your own UPS/Fedex/DHL account, we may be able to ship using that.

Shipping to US-Based Freight Forwarders

For shipments to freight forwarders, we are only responsible for shipping to the freight forwarder directly. Please have your freight forwarder check your items for damage. We are not responsible for shipping damages incurred at or after the items leave the freight forwarder.

California Title 20 Notice

Certain general service lighting products are no longer allowed to be sold in California. We make every attempt to inform you before purchase which items are unable to ship to California. If we discover an item you purchased can not be shipped, we may have to cancel the order. We apologize for any inconvenience this causes. Please contact your state representative for more information.

California Prop 65

California Prop 65 WarningWARNING: Cancer and Reproductive Harm -

Returns Policy

Returns are sometimes necessary. Our policy is to provide you with a hassle-free return experience.

Accepted Returns

Items Damaged in Shipping

If the product was damaged during shipping, first keep all packing materials, then call or email us to report the damage. Damage must be reported with 3 days of you receiving the shipment. We will have you return the product using the Returned Material Authorization (RMA) we will provide. We will send you a new product or provide a full refund and we will reimburse you for any shipping charges you may incur.

Missing Items

If all the items you ordered are not in the shipment, call us within 3 days of receiving the shipment so we can promptly send the missing item(s).

Wrong Product Ordered or Product No Longer Needed

If you ordered the wrong product call or email us so we can help you get the correct product. If the product purchase error was in no way the fault of information provided on, you are responsible for the return shipping cost and a 25% re-stocking fee.

30 Day Return Policy

Items ordered from ProLampSales can be returned within 30 days of receipt of the shipment in most cases. Please check that all of your items are present and in working condition within this timeframe.

After 30 days, if the product does not perform to specifications or fails within stated warranty periods, see manufacturer warranty information for procedures to follow.

Products that Differ from Our General Return Policy

International Orders

International orders may be non-returnable. Please contact us before ordering.

Gas Detectors & Air Quality Monitors

For safety reasons, we do not accept returns on gas detectors or air quality monitors. Once these products leave our warehouse, we can not be sure what environments they are used/stored in or what dangerous gases or pollutants they are exposed to.

Larson Electronics

Larson Electronics products of any kind are non-returnable. Larson Electronics orders are subject to a minimum 15% (and up to 100%) pre-shipment cancellation fee. If you need help with a product, please contact us before ordering or verify that you are ordering the correct item.


Non-Quick Ship Soraa brand products are non-returnable. If an error was made in order fulfillment or shipping, replacements may be sent out or a refund issued.

Customer Reviews

Be the first to write a review