Larson Electronics UVC Induction Lamp - 300W - 120/240V Ballast - Shatterproof - Chemical-Resistant Cord

This product is made in the USA and manufactured in Texas.

The FRL-IDC-WP-300W-UVC-SPF-HTC-XB.WP from Larson Electronics is a Submersible UVC Induction Lamp that serves as a shatterproof disinfection solution in industrial facilities and high-temperature environments. This 300-watt unit features a UVC induction lamp with a 360° beam angle configuration. Powered via an electromagnet to reduce the risk of gas leaks associated with fluorescent lights, the food-safe luminary comes with a weatherproof (not submersible) remote ballast that operates on 120-240V AC, 50/60 Hz and a high temperature chemical resistant cord between the lamp and ballast.

*Please note: This product produces UV light. Make sure to follow all safety guidelines and protocols found in the user manual. UVC light in the proper setting kills up to 99.9% of viruses, mold, spores, and bacteria.

The FRL-IDC-WP-300W-UVC-SPF-HTC-XB.WP is a powerful induction sanitation lamp that is suitable for germicidal illumination in extreme environments. This 300-watt lamp is fully submersible and provides UVC output within the 200nm - 280nm range. During use, the waterproof unit emits UV light with a 360° beam angle in a flood beam configuration. This mercury-based germicidal lamp operates on 120-240V AC, 50/60 Hz (ballast voltage) and does not contain electrodes. The food-safe lamp has a 100,000-hour useful lifespan, making the unit a long-lasting solution in work sites. Designed for extreme environments, this submersible UV lamp can withstand temperatures up to 300°F/150°C.

A durable FEP coating makes the lamp shatter resistant and provides protection from impacts. Should the bulb break during an emergency, the internal contents and glass will remain trapped inside the unit. This coating adds an extra layer of safety for workers and customers alike. See Cert5 Chemical Resistance FEP Chart for more information.

Operation: The FRL-IDC-WP-300W-UVC-SPF-HTC-XB.WP should only be used in non-occupied areas. The UVC radiation produced by this fixture is not safe for skin or eyes. These fixtures should also be set up on a separate circuit from other lighting. It is also advised to use a control circuit that incorporates a motion sensor with groupings of fixtures. This adds a level of safety because the lights will turn off if someone enters the area while the lights are on.

This UV lamp is a Risk Group 3 UV product. UV radiation from the unit can damage the skin and eyes without proper protection. Operators should avoid exposure to the eyes and skin when the unit is unshielded (for use in enclosed environments only). In the event of lamp breakage, it is recommended to ventilate the room for 30 minutes and clean the area with gloves (not a vacuum cleaner). Contents should be stored in a sealed plastic bag and brought to a waste/recycling facility.

Note on Lamps: Induction lamps are similar to high-intensity discharge lamps. There is a glass bulb filled with gases, and an external ballast. The difference in the technology is, unlike metal halide or high pressure sodium that create an arc between two electrodes to ignite gases, induction lamps generate light from an electromagnetic interaction with the gases. This magnetic reaction with the gases provides a more energy efficient product and a longer lifespan over traditional high intensity discharge lamps. Additionally, there is no warm-up time generally associated with high intensity discharge lamps. Induction lamps provide instant-on light output similar to LED technology. The combination of induction lamp technology and UVC output provides the high output from high intensity discharge lamps with the instant-on, long life span, and energy efficiency of LED technology.

Mounting: The FRL-IDC-WP-300W-UVC-SPF-HTC-XB.WP is equipped with surface mounting brackets at the back of the lamp.

Note on Environment: Sunlight and visible light fixtures do not impact the effectiveness of the disinfecting on this UVC sanitation product. Metal halide, high pressure sodium, fluorescent, and LED light fixtures can be left on. The UV radiation emitted from this product is not disrupted by any type of lighting in the environment. Put simply, NO it DOES NOT need to be dark in the area you plan to disinfect. The UV radiation is harmful to the eyes and skin, and that is why you should not be in the area while it is in operation. Please see user manual for additional safety information.

Applications: Germicidal, water purification, disinfection, food processing, air disinfection, pharmaceuticals, biotechnology and more.

Pre-Order Notice

Please take into consideration all of the following conditions before ordering Larson Electronics products. All Larson Electronics orders are subject to a minimum 15% (and up to 100%) pre-shipment cancellation fee. Larson Electronics products are non-returnable and non-refundable. Customer support for Larson products is extremely limited, if available at all. Larson Electronics products do not have warranties. Replacement parts may not be available at all. All pre-order and pre-shipment estimated ship dates are estimates only and are likely to change after ordering. Larson Electronics takes photos and videos of all products leaving their facility, and will not take responsibility for any shipment damages.

About Larson Electronics

Founded in 1973, Larson Electronic is an industrial lighting company, providing solutions for government, military, aviation, oil and gas, processing, manufacturing, and other markets. The company manufactures power distruction, industrial controls, explosion proof equipment, and UV lighting products in the USA. Larson is also able to provide customized fabrication for complex lighting and power requirements and has over 70,000 square feet of manufacturing and warehouse space.

Categories: Larson Electronics, UVC Induction Lamps